With more than 35 years experience in manufacturing scissor lifts, Ballymore offers a wide range of economical work platforms to meet your overhead access requirements. Eight standard models allow four workers access up to 33' working heights. These 1000 lbs. capacity high-performance work platforms are equipped with low maintenance hydraulic systems and are available with AC, DC, or Air-motor drives.
Custom lifts are available with special deck sizes and configurations, cantilevers and power options. All models have back-up safety features for worker security.
Working
Height |
Platform Height
Max. Min. |
Stabilizers |
Specify
Model
No. |
Wt. [lbs.] |
|
13'
|
7'4" 2'4"
|
Not Req'd.
|
HW1-7
|
1700
|
|
16'
|
10'1" 5'
|
Not Req'd.
|
HW1-10
|
1800
|
|
19'
|
12'10" 3'
|
Not Req'd.
|
HW2-13
|
2000
|
|
21'
|
15'8" 5'8"
|
Std. Equip.
|
HW2-16*
|
2100
|
|
24'
|
18'8" 3'7"
|
Std. Equip.
|
HW3-19*
|
2300
|
|
27'
|
21'4" 6'4"
|
Std. Equip.
|
HW3-22**
|
2400
|
|
30'
|
24'4" 4'1"
|
Std. Equip.
|
HW4-24**
|
2700
|
|
33'
|
27' 6'8"
|
Std. Equip.
|
HW4-27**
|
2800
|
NOTE: All base dimensions are 9 by 4 ft.
*Add 20" to 4-ft base width for extended stabilizers.
**Add 40" to 4-ft base width for extended stabilizers.
|
Features
|
- Rated capacity 1000 lbs./four persons
- Totally enclosed platform with 42" guardrails, midrails, 4" toeboards and swing-in gate
- Large 3' x 8' platform with serrated grating deck to assure secure footing
- Built-in ladder provides access to platform in fully lowered position
- Boxed scissor members and oversize cross-axles reduce platform sway
- Sturdy rectangular base frame with non-marking 8" swivel casters for easy rolling and maneuverability. Casters have combined wheel and swivel locks
- Self-storing outriggers extend from base to provide maximum stability [optional on lower height models]
Standard Power:
- 120 volt AC with thermal overload protection
- includes dual contactors for additional safety
- Low voltage platform controlled circuit for additional worker protection
|
Optional Power:
- 12 Volt DC deep cycle system available with battery and charger
- includes double solenoid for additional safety
- Air-Hydraulic Drive - Available
|
Hydraulic System:
- Large diameter cylinders with chrome-plated rams and fluid restrictors
- Low pressure system includes by-pass pressure valve to prevent overload
- Check valve maintains platform elevation
- Solenoid valve provides remote lowering
- Base mounted lowering valve for safe descent in power failure
|
- Leveling jacks secure unit to floor and compensate for uneven surfaces [standard on models with raised deck heights above 15', optional on lower height models]
- Bubble levels indicate proper leveling, essential for safe operation
- Safety Orange finish for high visibility
- Meets/exceeds ANSI A92.3-1990 code requirements
- Platform controls: for operator safety both hands are required to change elevation
- Emergency stops:
- located on platform for operator use
- emergency stop also located on base for use by ground personnel. Lockable to prevent unauthorized use
|
 |
 |
Hydraulic System:
- Large diameter cylinders with chrome-plated rams and fluid restrictors
- Low pressure system includes by-pass pressure valve to prevent overload
- Check valve maintains platform elevation
- Solenoid valve provides remote lowering
- Base mounted lowering valve for safe descent in power failure
Options/Accessories:
- In-plant tow packages
- Cantilevered platform extensions
- Road-wheel options
- Special voltage electrical systems
- Special enclosures
- Track-drive self propulsion
- 120 Volt outlet on platform
Contact us at service@maxmaterialhandling.com or 1-800-497-0629 for shipping costs and availability.
CAUTION: Unless special provisions are made, platforms and lifts must not be used for energized bare-wire electrical work or operated on inclined surfaces. When this equipment is used, ground personnel should be excluded from the immediate work area.
