MRO Telescoping Hydraulic Maintenance Lifts - Rugged 2 person 500 lbs. capacity!
Overhead Maintenance, Repair and Operating problems are solved with Ballymore’s two-worker MRO telescoping hydraulic lift. Helps maintenance workers get jobs done quickly and safely with easy mobility and high speed elevation. Four manually propelled models with working heights to 34’.
- Rated capacity 500 lbs. / two person
- Select from maximum platform heights of 15’, 19’, 24’ or 28’
- Roomy 28” x 36” platform accommodates two workers
- Totally enclosed platform with 42” guard rails, midrails and gate; 4” toeboards and non-slip deck
- Built-in ladder with flat, skid resistant treads and grab rails provides access to platform in fully lowered position
- Rails fold for doorway passage and easy storage
- Non-marking 8” casters for easy rolling and maneuverability
- Self-storing outriggers extend from base to provide maximum stability
- Leveling jacks secure unit to floor and compensate for uneven surfaces
- Standard deep gray enamel finish
- Meets/exceeds ANSI safety standards
- Hydraulic system includes:
- Large diameter cylinder with chrome-plated ram and fluid restrictor
- Low pressure system includes by-pass pressure valve to prevent overload
- Check valve maintains platform elevation
- Solenoid valve provides remote lowering
- Base mounted lowering valve for safe descent in power failure
Three available power options:
- Convenient plug in 120V/60/1AC
- Independent 12V DC deep cycle system complete with battery and charger
- Air hydraulic power requiring 140 CFM with 90 PSI pressure
Electrical Note: (on all lift products)
Our standard electrical components are NEMA 1 or equivalent and are intended for indoor use in normal atmospheric conditions.
Caution: Unless special provisions are made, platforms and lifts must not be used for energized barewire electrical work or operated on inclined surfaces. When this equipment is used, ground personnel should be excluded from the immediate work area. Compliance with unspecified codes should not be assumed.
Contact service@maxmaterialhandling.com or 1-800-497-0629 for shipping estimates.
| Model Number | Platform Max | Height Min | Working Height | Weight Lbs. |
|
MR-15-AC
|
15'
|
6' 4"
|
21'
|
800
|
|
MR-15-DC
|
15'
|
6' 4"
|
21'
|
930
|
|
MR-20-AC
|
19' 3"
|
6' 4"
|
25'
|
1000
|
|
MR-20-DC
|
19' 3"
|
6' 4"
|
25'
|
1130
|
|
MR-24-AC
|
23' 8"
|
6' 7"
|
30'
|
1200
|
|
MR-24-DC
|
23' 8"
|
6' 7"
|
30'
|
1330
|
|
MR-28-AC
|
28'
|
6' 10"
|
34'
|
1420
|
|
MR-28-DC
|
28'
|
6' 10"
|
34'
|
1550
|
|
OPTIONAL ACCESSORIES
|
|
|
| Air-Hydraulic power |
| Tool Tray |
| Safety Orange Finish |
| Fluorescent tube holder |
| Platform duplex receptacle |
